Jiashan Changsheng Composite Bearing Factory

sliding bearing(1)

Jiashan Changsheng Composite Bearing Factory

Showing 1 - 10 of 10, total 1 pages [First] [Previous] [Next] [Last]

fz ball retainer bearing
Specification: sizes from 1950 to 80130
Detail: Ball Retainer Bearing with the rolling ball principle, with a copper base, aluminum or resin to maintain the planes, according to a certain angle and density arranged in an orderly manner. Using the latest trench technology ci...

500# jdb sliding bearing and copper bush
Specification: sizes from 142010 to 140160100
Detail: Oilless sliding Bearing bushings is based on high-strength copper alloy for the matrix, forming a solid lubricant embedded into the bearing, slider, etc.. The product broke the general bearings depend on the bo...

fb09g bronze bearing bush
Specification: sizes from 1010 to 160100
Detail: FB09G Wrapped Bronze Bearing & bushing and FB090 have the same production process and the use of occasions, and its substrate matrix for the bronze, in its diamond-shaped oil filled with graphite-based solid lubricant,. ...

fb08g bronze bearing bush
Specification: sizes from 1010 to 160100
Detail: Wrapped Bronze Bearing and bushing are high quality low carbon steel plate for the substrate, the surface of sintered Cu Pb10 Sn10 tin bronze alloy, alloy surface buried in a special solid lubricant. it ha...

fb092 bronze bearing bush
Specification: sizes from 1010 to 300100
Detail: FB092 Wrapped Bronze Bearing and bushing is based on bronze CuSn8.3P0.3 and evenly distributed drilling oil hole on itsbody. When in assembly, oil or grease should be stored in the holes before bushing is sealed fro...

fb090 bronze bearing bush
Specification: sizes from 1010 to 300100
Detail: FB090 Wrapped Bronze Bearing & bushing is specially formulated high-density copper alloy strip for the substrate surface can be requested by user or hemispherical diamond rolling oil hole, oil. Products with high density, bear...

bimetal bearing bush
Specification: sizes from 1010 to 7080
Detail: Bimetal oilless sliding bearing has a combination of high strength, load-bearing capacity, and the advantages of good wear resistance. Particularly suited to medium-speed and low-speed high-contained set and so on. ...

sliding bearing flanged
Specification: sizes from 06040 to 40400
Detail: Flanged oilless sliding bearings & bushings may be used where no oil can be applied or oil is difficult to be applied . It has the advantage of low wear,low friction and with long life. Load will spread over a wider a...

boundary-lubrication bearing
Specification: sizes from 1010 to 280120
Detail: Marginal-Lubrication oilless sliding bearing to steel as matrix, sintered bronze spherical powder as the middle layer, the surface of rolling modified Polyoxymethylene (POM) and has storage pit. Plastic surface of...

sliding bearing bush self-lubricated
Specification: size from 0606 to 280100
Detail: Sliding bearing is a plate for the matrix, between sintered bronze spherical powder, the surface of rolling polytetrafluoroethylene (PTFE) and lead compounds, formed by the rolling of the sliding bearing. With...


Showing 1 - 10 of 10, total 1 pages [First] [Previous] [Next] [Last]
1